Finish
Full and Exposure
Finish
Polished Concrete Full Stone Finish
The Polished Concrete Full Stone Finish uses a deeper grinding process to fully expose the aggregate within the concrete. Scratch marks are then progressively removed to produce a fully polished concrete floor.
This highlights the natural beauty of the individual stones that would otherwise remain hidden within the concrete floor.
Procedure
- Grind with 20/30 grit to achieve desired exposure and flatness
- Grind with 50/60 grit to remove scratches
- Apply GM3000 while grinding 100/120 grit to fill small holes and imperfections
- Harden using HiperHand Densifier/Hardener applied by broom
- Remove excess HiperHand Densifier/Hardener using 50 grit resin bond pads
- Apply lick coat of HiperHand Densifier/Hardener – allow to dry
- Remove HiperHand Densifier/Hardener with 100 grit resin bond
- Repeat 6 if required
- Remove HiperHand Densifier/Hardener with 200 grit resin bond
- Polish with 400 grit — Matt Finish
- Polish with 800 grit — Satin Finish
- Polish with 1500 grit
- Polish with 3000 grit — Full Gloss
- Apply 2 coats Hiperguard Enhancer plus sealer – allow to dry
- Buff off excess Enhance
Concrete Requirements: Concrete needs to be 28 mpa strength or higher.
Ready to Transform Your Concrete?
Upgrade your driveway, garage, or outdoor space with durable,
custom concrete finishes — done right the first time.
